• HOME
  • HF
  • VHF-UHF
  • AMPLIFIERS
  • STaR Transceivers

  • Various Circuits
  • EME Moonbounce
  • 70cm EME
  • 23cm EME
  • 13cm EME
  • 9cm EME
  • 6cm EME
  • 3cm EME
  • 24GHz EME

VK3NX





Australian Amateur Radio STation



24 GHz EME



EQUIPMENT ON 24 GHz EME


• 2.4 m Solid dish (Andrews)

• 11.5 W Kuhne SSPA (10 W at feed) short WR42 flexible W/G to W/G Switch (~0.5dB loss)

• Feed: Super VE4MA choke flange with Circular to rectangular transition (WR42)

• W/G switch: “EVENTS HORIZON”

• LNA @ feedKuhne 1.5dB NF 27 db gain + DB6NT design (homebrew) NF= Max 2.0dB Gain = 11.5dBTotal gain is 38.5dB in “feed box”

• LMR240 with Radiall 18GHz connectors for short run on Tx and Rx from “feed box” to transverter

• Transverter = Thales 26 GHz units running 1296 MHz IF. Then 2nd down-conversion to 144MHz IF.

• Kuhne 24 GHz W/G filters on Rx and Tx ports of Thales unit. (Absolutely necessary due to very poor image rejection ~4dB only with 1296 MHz IF)




Perfomance:

• Best Moon noise measured at 2.2dB

At low path loss and low levels of libration my echoes are audible.



24 GHz EME Audio recordings



My Echoes were as recorded in October 2014 with low libration and low loss conditions.
They are very weak...but they are there!


LX1DB - OOO
LX1DB - RRR
W5LUA - VK3NX Call
W5LUA - VK3NX Rpt
W5LUA - VK3NX Confirmation
VK3NX My Echo - 1
VK3NX My Echo - 2

QSO Reports



Links to *word doc reports of some of the 24 GHz EME QSO's I have completed.


OK1KIR
JA1WQF
LX1DB
W5LUA
DF1OI

24 GHz EME Log book


Log Book

VK3NX